1. Introduction of Special Steel Platform

Special steel platform is also called working platform. Modern steel platform has various forms and functions. Its structure is characterized by full assembly structure, flexible design and wide application in modern storage. Engineering structures made of steel are usually composed of beams, columns and plates made of profiled steel and steel plates, which are joined by welds, screws or rivets.

2. Safety Maintenance of Special Steel Platform

1. Special steel platforms should be equipped with load-limiting plates.
2. The shelf point and the upper tie point of the special steel platform must be located on the building, not on the scaffolding and other construction facilities, and the support system must not be connected with the scaffolding.
3. Concrete beams and slabs at shelf points of special steel platforms should be embedded and connected with bolts of platforms.
4. The horizontal angle between the wire rope and the platform should be 45 degrees to 60 degrees.
5. The beam and column of the upper tie point of the special steel platform should check the tensile strength to ensure the safety of the building and platform.
6. Clasps shall be used for special steel platforms, and hooks shall not be directly hooked to platform rings.
7. When installing special steel platforms, special hooks should be used to fasten the steel ropes, and no less than three clamps should be used in other ways. Soft cushions should be lined at the steel ropes around the sharp corners of buildings, and the outside of the steel platforms should be slightly higher than the inside.
8. The left and right sides of the special steel platform must be fixed like railings and hung with a close-eyed safety net.